[wpdatatable id = 96 table_view = regular]

Substituindorolamentos de esferas de travesseiro de ferro fundidoda UCP 218

If a bearing insert needs to be replaced, it is not always necessary to replace the housing, if the housing
is undamaged.Simply insert a new bearing into the old housing, after care fully inspecting the housing to assure that it is not damaged.

Replacement procedures for a bearing insert are listed below.
(1) Remove the complete bearing unit from the shaft and mounting base.
(2) Screw in the set screws so that the head of the set screw does not protrude outside the 0.D. the inner race. Otherwise the head of the set screw may damage the bearing seat inside the housing.
(3) Turn the bearing 90° with a hammer handle or a bar or pipe until the bearing is horizontal.
(4) Remove the bearing insert from the housing via the bearing groove in the housing.
Reverse the above procedure to put in a new bearing insert. Insure that the set screws are screwed in before proceeding with the replacement.

Atacado UCP 218 | Fornecedor UCP 218

Bem-vindo aoFabricante UCP 218– NSAR, your trustedFábrica de rolamentos de esferas UCP 218 no atacadoRolamento de esferas de mancal UCP 218! Como fabricante líder de rolamentos de mancal UCP 218 na indústria de rolamentos, temos imenso orgulho em fornecer UCP 218 de alta qualidade, incluindo UCP 216, UCP 217. A NSAR oferece uma ampla gama de UCP 218 com os preços mais competitivos, o que fornecerá a você com uma ótima experiência de compra.